TACTICAL SHOTGUN FIELD MAINTENANCE PACK
Compact, go-anywhere kit contains all the essential tools needed to disassemble, maintain, and repair today’s common tactical and law enforcement shotguns. Not a run-of-the-mill cleaning kit with generic tools, but a set of carefully selected, high-quality armorer tools designed to perform specific tasks on Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. You’ll have the exact tool you need at your fingertips, without scrounging through a case full of tools for other guns or lugging around unnecessary weight. There’s a universal double-ended forend wrench for easy, non-slip removal of the forend nut without damage. Magazine tube pliers have adjustable, padded, curved jaws for easy removal of mag tubes and stuck magazine caps without marring the finish. T-handle driver comes with correct sockets for removing buttstock bolts, including a self-guiding, sleeved socket for the 870 and a socket for the new action spring tube nut on current-production Remington Model 11-87 Police shotguns (will also fit current 1100). Use the punch set with the brass/nylon head hammer and non-marring bench block to remove retaining pins while protecting the gun’s finish. The full-size #84 Magna-Tip screwdriver comes with the necessary interchangeable bits, including a 12-gauge shotgun choke tube wrench and an extra-long 3/16" Philips head bit for recoil pad screws. Our handy packing hook tool is indispensable for grasping, locating, or releasing springs and small parts. Plenty of compartments inside the water- and tear-resistant, 1000 denier Cordura case let you secure the tools to minimize unwanted shifting and noise. Quiet, #9 YKK nylon zippers with oversize pulls ensure fast, easy access to the tools. Front panel features a clear, I.D. card sleeve, loop strip for name tape, and ¾" wide, nylon grab handles for easy carry.
SPECIFICATIONS:
- Armorers Tools For Tactical/Law Enforcement Shotgun Models
- Benelli
- Mossberg 500/590/835
- Remington 870/1100/11-87
- #84 Hollow MAGNA-TIP Handle
- Hardened Steel MAGNA-TIP Bits
- 210-5 and 270-5 Hollow Ground Bits
- 3/16" Phillips Bit
- MAGNA-TIP Choke Tube Wrench
- 12 Gauge Shotgun Forend Wrench
- Magazine Tube/Cap Pliers
- 3/8" Socket Sliding T-Handle Drive
- 3/8" Siocket 6" Extension
- 3/8" Drive 1/2" Socket
- Drag Link
- Remington 870 Buttstock Bolt Bit
- Steel Packing Hook/Scribe
- 12 Gauge Bore Snake
- Double Ended Nylon Parts Cleaning Brush
- 6" Needle Nose Pliers
- 4" Steel Knurled Starting Punches
- 4" Steel Pin Punches
- 1" Nylon/Brass Hammer w/ Hickory Handle
- Nylon Bench Block
- Remington 870/1100 Pin Pusher
- 1000 Denier Cordura Nylon O.D. Green Bag
- Length: 11 1/2"
- Width: 8 1/2"
- Thickness: 3"
